40th International Conference on Production Engineering of Serbia
ICPES 2025
Nis, Serbia, 18-19th september 2025
MEASURING MILLING FORCE WITH TWO C9C FORCE TRANSDUCERS
Attila RÉTFALVI, Tamás TORNAI
DOI: 10.46793/ICPES25.048R
Cutting forces during milling can be measured using several high-quality, though expensive, devices available on the market. In this study, an attempt was made to measure the cutting forces using two C9C force transducers. The results obtained from these measurements are discussed in this paper.
Milling force measurement, C9C force transducer
[1] M. A. Rubeo, T. L. Schmitz: Milling Force Modelling: A Comparison of Two Approaches, 44th Proceedings of the North American Manufacturing Research Institution of SME, Procedia Manufacturing, Volume 5, 2016, pp. 90–105
[2] J.-J. Junz Wang, C.M. Zheng: An analytical force model with shearing and ploughing mechanisms for end milling, International Journal of Machine Tools & Manufacture 42 (2002), pp. 761–771
[3] L. Cen, S. N. Melkote: Effect of Robot Dynamics on the Machining Forces in Robotic Milling, Proceedings of the 45th SME North American Manufacturing Research Conference, Procedia Manufacturing 10 (2017) 486 – 496
[4] M. Wu, G. Zhang, T. Wang, R. Wang: Milling Force Modeling Methods for Slot Milling Cutters, Machines, vol. 11, 2023, 922, https://doi.org/10.3390/machines11100922
[5] S.M. Afazov, S.M. Ratchev, J. Segal: Modelling and simulation of micro-milling cutting forces, Journal of Materials Processing Technology, 210 (2010) pp. 2154–2162
[6] S. Huang, K.K. Tan, G.S Hong: Cutting Force Control of Milling Machine, Mechatronics Volume 17, Issue 10, 2007, pp. 533-541
[7] T. Pan, J. Zhang, X. Zhang, W. Zhao, H. Zhang, B. Lu: Milling Force Coefficients-based Tool Wear Monitoring for Variable Parameters Milling, International Journal of Advanced Manufacturing Technology, volume 120, 2022, pp 4565-4580